1999 Nissan Frontier 4 Cylinder Workshop Service Manual

1999 Nissan Frontier 4 Cylinder Workshop Service Manual
king cab,d22 Series 4 cil, 2.4 ka Engine service repair manual.
Nissan Navara is the name for the D22 as well as D40 generations of Nissan pickup trucks marketed in Asia, Australia as well as Europe; in North, Central and South America it is sold as the Nissan Frontier. The line began in 1997, replacing the D21 Nissan Hardbody vehicle. Since 2002, the D22 collection pickup is no more marketed in Japan; the D22’s main market being The United States and Canada. It is presently built at the Nissan manufacturing facility in Canton, Mississippi.

1999 Nissan Frontier 4 Cylinder Workshop Service Manual

1999 Nissan Frontier 4 Cylinder Workshop Service Manual

Nissan was the pioneer of the “Hardbody” or “Nissan Frontier” considering that 1986. The initial was the D21, considered to be a little pick up. After greater than 10 years with the D21, the second generation Navara was produced from 1997 and also went until 2004 which was classified as a compact sized pick up. It was replaced with the bigger, taller, longer D40, which Nissan currently thinks about to be a mid-size pick up truck.

The Navara obtains its name from the Navarre region of northern Spain, and also the European variation is built at the Nissan manufacturing facility in Barcelona. In many European markets it is marketed as the Nissan NP300.

1999 Nissan Frontier 4 Cylinder Workshop Service Manual

The Frontier was presented in 1997 for the 1998 model year as a substitute for the aging 1986.5-1997 Nissan Hardbody Vehicle. Nissan initially provided the Frontier with a 4-cylinder engine, the KA24DE, but added the V6 engine, the VG33E in 1999. In Australia the D22 had the KA24E till 1999, then changed to KA24DE choice that year, a 3.0 L V6 was introduced in June 2000. In February 2003, 4×4 versions obtained a larger 3.3 L V6 (available only with a 5-speed guidebook), while 4×2 designs proceeded with the 3.0 L V6 (with handbook or automatic transmissions). The V6 was dropped in 2005, leaving the 2.5 L turbo diesel as the only offered engine. In other places, the Frontier was also known as the Nissan Navara.

A four-door version of the D22 was developed and established during 1997– 1998, wasing initially created in April 1999 and also released in May 1999 as the 2000 Frontier Crew Taxicab.

In February 2000 at the Chicago Automobile Show, Nissan introduced a facelifted Frontier for 2001, with bolder styling in an effort making it more enticing to younger buyers in its 2nd generation. The Frontier was entirely redone after the 2004 version year, which later on led to the uncertain discontinuation of the regular cab model.

1999 Nissan Frontier 4 Cylinder Workshop Service Manual
1999 Nissan Frontier 4 Cylinder Workshop Service Manual
Free shipping by emails
Price: $19.90

1999 Nissan Frontier 4 Cylinder Workshop Service Manual

Nissan Frontier 2016 Workshop Service Manual – Car Repair

Nissan Frontier 2016 Workshop Service Manual – Car Repair
1. Drive belt
4. Crankshaft pulley 7. Idler pulley
Checking Drive Belts
WARNING:
2. Power steering oil pump pulley 5. A/C compressor (with A/C)
8. Drive belt tensioner
3. Generator pulley 6. Cooling fan pulley
Be sure to perform when the engine is stopped.

1. Remove air duct and resonator assembly when inspecting drive belt. Refer to EM-142, “Removal and Installation”.

Make sure that the auto-tensioner indicator is within the allow- able working range (A) as shown.

3. Visually check entire belt for wear, damage or cracks.
4. If the indicator is out of allowable working range or drive belt is damaged, replace the drive belt. Refer to EM-130, “Removal and Installation”.

Nissan Frontier 2016 Workshop Service Manual - Auto Repair

Nissan Frontier 2016 Workshop Service Manual – Auto Repair

Nissan Frontier 2016 Workshop Service Manual – Car Repair

Adjustment
AWBIA0723ZZ
There is no manual drive belt tension adjustment. The drive belt tension is automatically adjusted by the drive belt auto-tensioner.
Removal and Installation REMOVAL
1. Remove air duct and resonator assembly.
2. Rotate the drive belt auto-tensioner in the direction of arrow (loosening direction of tensioner) as shown, using suitable tool.
WARNING:
Avoid placing hand in a location where pinching may occur if the tool accidentally comes off.
3. Remove the drive belt.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Make sure belt is securely installed around all pulleys.
Drive Belt Auto-Tensioner and Idler Pulley

Nissan Frontier 2016 Workshop Service Manual - Car Repair
Nissan Frontier 2016 Workshop Service Manual - Car Repair
Free shipping by email
Price: $29.99

Nissan Frontier 2016 Workshop Service Manual – Car Repair

Auto Repair – Nissan Frontier 2014 Workshop Service Manual

Auto Repair – Nissan Frontier 2014 Workshop Service Manual
Disassembly and Assembly
DISASSEMBLY
NOTE:
2. Gasket
3. Cylinder block heater
The following procedures explain how to disassemble the engine with the engine stand fastened to the bell housing. Some steps may be different if using a different type of engine stand.
1. Remove the engine and the transmission assembly from the vehicle, and separate the transmission assembly from the engine.
2. Remove clutch cover and clutch disc (M/T models).
3. Remove flywheel (M/T models) using suitable tool or drive plate (1) (A/T models) using Tool (A).
• Secure crankshaft Tool, and remove bolts using a suitable
tool.

Auto Repair - Nissan Frontier 2014 Workshop Service Manual

Auto Repair – Nissan Frontier 2014 Workshop Service Manual

Auto Repair – Nissan Frontier 2014 Workshop Service Manual

CAUTION:
• Be careful not to damage or scratch drive plate (A/T models) and contact surface for clutch disc of flywheel (M/T models).
• Place the drive plate or flywheel with signal plate sur- face facing other than downward.
• Keep magnetic materials away from signal plate.
NOTE:
The flywheel, two block construction, allows movement in response to transmission side pressure, or when rotated. Therefore, some amount of noise is normal.
4. Remove the parts that may restrict installation of engine to engine stand.
a. Remove drive plate (A/T models) or flywheel (M/T models).
• Holding crankshaft pulley bolts, lock crankshaft to remove flywheel or drive plate bolts. • Loosen bolts diagonally.
b. Remove generator. Refer to CHG-28, “Removal and Installation – QR25DE Models”.
c. Remove engine mounting insulator bracket (upper) with power tool.
5. Lift engine, and mount to engine stand. Any commercially avail- able engine stand can be used.

Auto Repair - Nissan Frontier 2014 Workshop Service Manual
Auto Repair - Nissan Frontier 2014 Workshop Service Manual
Free shipping by email
Price: $25.00

Auto Repair – Nissan Frontier 2014 Workshop Service Manual

 

Auto Mechanic – Nissan Frontier 2012 Workshop Service Manual

Auto Mechanic – Nissan Frontier 2012 Workshop Service Manual
Precaution for Removal and Disassembly
• When instructed to use special service tools, use the specified tools. Always be careful to work safely, avoid forceful or uninstructed operations.
• Exercise maximum care to avoid damage to mating or sliding surfaces.
• Cover openings of engine system with tape or equivalent, if necessary, to seal out foreign materials.
• Mark and arrange disassembly parts in an organized way for easy troubleshooting and re-assembly.
• When loosening nuts and bolts, as a basic rule, start with the one furthest outside, then the one diagonally
opposite, and so on. If the order of loosening is specified, do exactly as specified. Power tools may be used in the step.
Precaution for Inspection, Repair and Replacement Before repairing or replacing, thoroughly inspect parts. Inspect new replacement parts in the same way, and replace if necessary.

Auto Mechanic - Nissan Frontier 2012 Workshop Service Manual

Auto Mechanic – Nissan Frontier 2012 Workshop Service Manual

Auto Mechanic – Nissan Frontier 2012 Workshop Service Manual

• Use torque wrench to tighten bolts or nuts to specification.
• When tightening nuts and bolts, as a basic rule, equally tighten in several different steps starting with the
ones in center, then ones on inside and outside diagonally in this order. If the order of tightening is specified,
do exactly as specified.
• Replace with new gasket, packing, oil seal or O-ring.
• Thoroughly wash, clean, and air-blow each part. Carefully check engine oil or engine coolant passages for
any restriction and blockage.
• Avoid damaging sliding or mating surfaces. Completely remove foreign materials such as cloth lint or dust.
Before assembly, oil sliding surfaces well.
• Release air within route when refilling after draining engine coolant.
• Before starting engine, apply fuel pressure to fuel lines with turning ignition switch ON (with engine stopped).
Then make sure that there are no leaks at fuel line connections.
• After repairing, start engine and increase engine speed to check engine coolant, fuel, engine oil, and
exhaust gasses for leakage.

Auto Mechanic - Nissan Frontier 2012 Workshop Service Manual
Auto Mechanic - Nissan Frontier 2012 Workshop Service Manual
Free shipping by email
Price: $23.99

Auto Mechanic – Nissan Frontier 2012 Workshop Service Manual

2011 Nissan Frontier D40 Factory Service Repair Manual

2011 Nissan Frontier D40 Factory Service Repair Manual
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted. Information necessary to service the system safely is included in the SR and SB section of this Service Repair Manual.

2011 Nissan Frontier D40 Factory Service Repair Manual

2011 Nissan Frontier D40 Factory Service Repair Manual

PERIODIC MAINTENANCE
EXHAUST SYSTEM
Checking Exhaust System.
Check exhaust pipes, muffler and mounting for improper attachment, leaks, cracks, damage or deterioration. • If anything is found, repair or replace damaged parts.

2011 Nissan Frontier D40 Factory Service Repair Manual

• Discard any heated oxygen sensor which has been dropped from a height of more than 0.5 m (19.7
in) onto a hard surface such as a concrete floor; install a new one. A
• Do not over-tighten the heated oxygen sensor. Doing so may damage the heated oxygen sensor, resulting in the MIL coming on.
• If any mounting insulator is badly deformed, repair or replace it. If deposits such as mud pile up on the mounting insulators, clean and inspect them.
• Temporarily tighten the nuts on the exhaust manifold side and the bolts on the vehicle side. Check each part for interference with other components, and then tighten the nuts and bolts to specifica- tion. C
INSPECTION AFTER INSTALLATION
• With the engine running, check exhaust tube joints for gas leakage and unusual noises.
• Check to ensure that mounting brackets and mounting rubbers are installed properly and free from undue
stress. Improper installation could result in excessive noise and vibration.

2011 Nissan Frontier D40 Factory Service Repair Manual
2011 Nissan Frontier D40 Factory Service Repair Manual
Free shipping by email
Price: $19.99

2011 Nissan Frontier D40 Factory Service Repair Manual

2009 Nissan Frontier 4×4 Workshop Service Repair Manual

2009 Nissan Frontier 4×4 Workshop Service Repair Manual
Precaution for Supplemental Restraint System (SRS) “AIR BAG” and “SEAT BELT
PRE-TENSIONER”.
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted. Information necessary to service the system safely is included in the SR and SB section of this Service Manual.

2009 Nissan Frontier 4x4 Workshop Service Repair Manual

2009 Nissan Frontier 4×4 Workshop Service Repair Manual

2009 Nissan Frontier 4×4 Workshop Service Repair Manual

WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in the event of a collision which would result in air bag inflation, all maintenance must be performed by an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag Module, see the SR section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har- ness connectors.
[QR25DE]
Precaution for Drain Engine Coolant
Drain engine coolant when engine is cooled. Precaution for Disconnecting Fuel Piping
• Before starting work, make sure no fire or spark producing items are in the work area. • Release fuel pressure before disconnecting and disassembly.
• After disconnecting pipes, plug openings to stop fuel leakage.
Precaution for Removal and Disassembly
• When instructed to use special service tools, use the specified tools. Always be careful to work safely, avoid forceful or uninstructed operations.
• Exercise maximum care to avoid damage to mating or sliding surfaces.
• Cover openings of engine system with tape or equivalent, if necessary, to seal out foreign materials.
• Mark and arrange disassembly parts in an organized way for easy troubleshooting and re-assembly.
• When loosening nuts and bolts, as a basic rule, start with the one furthest outside, then the one diagonally
opposite, and so on. If the order of loosening is specified, do exactly as specified. Power tools may be used in the step.

2009 Nissan Frontier 4×4 Workshop Service Repair Manual
2009 Nissan Frontier 4×4 Workshop Service Repair Manual
Free shipping by email
Price: $19.90

2009 Nissan Frontier 4×4 Workshop Service Repair Manual

2008 Nissan Frontier 4×4 Workshop Service Repair Manual

2008 Nissan Frontier 4×4 Workshop Service Repair Manual
This manual contains maintenance and repair procedure for the 2008 NISSAN FRONTIER.
In order to assure your safety and the efficient functioning of the vehicle, this manual should be read thoroughly. It is especially important that the PRECAUTIONS in the GI section be completely understood before starting any repair task.
All information in this manual is based on the latest product information
at the time of publication. The right is reserved to make changes in specifi- cations and methods at any time without notice.

2008 Nissan Frontier 4x4 Workshop Service Repair Manual

2008 Nissan Frontier 4×4 Workshop Service Repair Manual

2008 Nissan Frontier 4×4 Workshop Service Repair Manual

IMPORTANT SAFETY NOTICE
The proper performance of service is essential for both the safety of the technician and the efficient functioning of the vehicle.
The service methods in this Service Manual are described in such a manner that the service may be performed safely and accurately. Service varies with the procedures used, the skills of the technician and the tools and parts available. Accordingly, anyone using service procedures, tools or parts which are not specifically recommended by NISSAN must first be completely satisfied that neither personal
safety nor the vehicle’s safety will be jeopardized by the service method selected.

2008 Nissan Frontier 4x4 Workshop Service Repair Manual
2008 Nissan Frontier 4x4 Workshop Service Repair Manual
Free shipping by email
Price: $19.99

2008 Nissan Frontier 4×4 Workshop Service Repair Manual